A.Hock
Electric actuators of the Series E2000NR
Linear actuators with fail-safe option
The electric actuators of A. Hock’s Series E2000NR offer maximum safety, reliability and flexibility. The linear actuators feature a special fail-safe position complying with DIN EN 14597. In the event of power failure, the actuators are set to fail-safe position (zero voltage retraction mechanism). This means that the thrust rod is either retracted or extended. The required energy is stored in a spring stack and transmitted to the thrust rod in the event of power failure. In modulating duty, the end position seating is made via limit switches.
According to the specific field of application, the fail-safe actuator E2000NR can be adjusted in terms of positioning force, stroke and positioning time in normal and fail-safe mode.
Article number: E2000NR2.1
Go to overviewTechnical
- Rated travel
- 35-46 mm
- Max forces
- 0,9 - 5,3 kN
- Handwheel
- only with switch
- Response time
- 17,5 mm/min
- Power supply
- 24 V / 115 V / 230 V 50/60 Hz
Application areas
Features and advantages
- low height due to a compact integrated unit
- stall-proof synchronous motors ensuring highest positioning accuracy
- safe operation and reduced maintenance requirements due to mechanical system without hydraulic fluid
- modular design for easy extension of functionalities
- wide range of accessories
Combine our control valves with the appropriate electric linear actuator.
If you need help with this, please contact us.