Control valve series 2000

Tight finish in seat and plug

• Function: Due to high accuracy of the individual parts, a leakage rate of 0.01 % of kvs is achieved without rework
• Benefit: Cost reduction, as no rework is required when replacing the trim.

Plug and rod welded together

• Function: Very good alignment of taper, seat ring and guide bush
• Benefit: Cost reduction when replacing the trim

Three different characteristic curves available

• Function: By replacing the plug: equal percentage, linear, open-close
• Benefit: Easy adaptation to the behavior of the control loop

Interchangeable trim-parts

• Function: Characteristics, kvs values, materials, pressure compensation and sound reduction can be changed by changing the plug and/or seat ring.
• Benefit: High flexibility is achievable with low inventory costs

Seat surfaces adapted to the kvs value

• Function: Valve handles closing pressures up to nominal pressure with standard actuators
• Benefit: Cost reduction through use of lower-cost drives.

Six different standard materials for housing and bonnets are available

• Function: -200°C to +530°C Acids, alkalis, solids can be controlled with this valve. Resistant to almost all media.
• Benefit: facilitates standardization

Easily replaceable guide bush

• Function: Allows quick adaptation to most media, temperatures and other operating conditions.
• Benefits: Low maintenance costs and greatly expanded range of applications

Double-walled bellows seal to the outside

• Function: The seamless bellows can be loaded up to the nominal pressure. The calculation basis is: 100,000 double strokes
• Benefit: High operational reliability and service life

Noise-reducing valve inner parts

• Function: Multilevel relaxation
• Benefit: Noise and wear reduction